Hats & Caps
Bonnets sous le casque, bandeaux pour l'effort, casquette contre le soleil
Bien choisir son bonnet de montagne selon le froid et le casque
Setting out from the refuge at 5 a.m., wind on the ridge, helmet going on in ten minutes: that’s when you choose a mountain beanie, not in front of a mirror. Our beanies are knitted in Italy, using recycled wool spun in the Tarn or recycled polyester and cotton for the technical version, and each product page lists a weight of 50 g.
L’essentials
- GEBO CUFF, GEBO POW, GEBO RIB and GEBO STRIPE combine 70% recycled wool and 25% polyamide, using yarn spun in the Tarn without dyeing.
- GEBO, the technical beanie, has a fine knit made from recycled polyester and cotton, plus an inner fleece band to fit under a helmet.
- 1-ply knit for a flexible fabric, 2-ply for a denser knit, fleece lining for really cold starts.
- Every beanie comes in one size and a unisex fit: the ribbing and cuff provide the adjustment.
- When a beanie is too much: GHEADBAND and RUPRICAPRA ear warmers, SOWA UPF 50+ cap for strong sunshine.
- 5-year commercial warranty, in addition to the 2-year legal warranty of conformity, with repairs available.
Wool beanie or technical beanie: which one for your outing?
It all depends on what your head will be doing during the day: staying warm during breaks, or spending hours under a helmet shell. The two types address different needs, and you notice the trade-off as soon as you put on your helmet.
The recycled wool beanie: warm, even when damp
Wool retains some of its insulating power even when damp, as it absorbs water, which matters on a climb where you alternate between sweaty ascents and waiting at a belay. Our wool styles combine 70% recycled wool, 25% polyamide for the knit’s durability, and 5% other fibers. The cuff doubles the thickness over the forehead and ears, the two areas that feel the cold first.
The trade-off is clear: a wool beanie is thicker than a fine synthetic knit. With the cuff folded up, it fits under a mountaineering helmet, but if you have to loosen the harness by several notches, this isn’t the right beanie for that use.
GEBO: the technical beanie designed for wearing under a helmet
GEBO takes the opposite approach. Its knit, made from 55% recycled polyester and 42% recycled cotton, stays thin across the whole head, while a recycled polyester fleece band lines the inside of the headband, where the helmet harness and chin strap press. The logo is jacquard-knitted into the fabric: no patch creates a pressure point under the shell after an hour.
This is the beanie you keep on from the approach to the summit on a ridge climb, while ski touring or climbing, because the polyester and cotton blend lets vapor escape when your pace picks up. For a long break in strong winds, a 2-ply or fleece-lined wool model will keep you warmer.
1-ply, 2-ply, or fleece-lined: choosing a wool beanie for the cold
Our wool models use the same material; it’s the knit construction that changes how warm they feel. Here’s how to choose your beanie based on the forecast temperature.
- 1-ply knit (GEBO CUFF): a soft, breathable knit for cool but not freezing days and strenuous ascents.
- 2-ply knit (GEBO RIB, GEBO STRIPE): a denser knit that traps more air, for windy ridgelines or waiting at a belay.
- Fleece lining (GEBO POW): recycled polyester fleece against the forehead and ears, for starts before sunrise and exposed chairlifts.
GEBO RIB has one extra quality: its ribbing stretches widthwise and springs back into shape after every time you pull on a hood, making it a good fit for heads that find a classic beanie too tight. GEBO STRIPE retains the density of the 2-ply knit, with stripes achieved without any dye.
Recycled wool spun in the Tarn, a beanie knitted in Italy
The yarn for our wool beanies is spun in the Tarn, using a process that preserves fiber length during shredding. This is the usual weak point of recycled wool: fibers that are too short produce yarn that breaks and pills. L's story is told in our article on recycled wool spun in France.
The fibers are sorted by color before spinning: the light gray, ochre, or navy comes from the original textiles, not a dye bath. In GEBO STRIPE, each stripe retains the color of its own fibers. Only GEBO POW’s fleece lining is dyed, in Italy, where each beanie is then knitted and made up. We deliberately separate the two steps: the yarn is spun in France, while the knitting and making are done in Italy.
Headband or cap: when a beanie is too much
A sunny ascent on touring skis, an early-morning approach to a climbing route, a July day on a glacier: your head doesn’t always need to be fully covered. That’s when two other pieces step in for the beanie.
The headband: warm ears, breathable scalp
A headband covers the forehead and ears, where the cold is felt first, while allowing heat to escape from the top of the head during exertion. GHEADBAND weighs 50 g and comes in two versions assembled in Italy: one knitted from the same recycled wool spun in Tarn as our beanies, the other in a jacquard knit of recycled polyester and cotton. Both have a recycled polyester fleece lining against the skin.
RUPRICAPRA is all about lightness: 15 g on the scale, made from 240 g/m² stretch fleece consisting of 92% recycled polyester and 8% elastane, knitted in Spain and assembled in Portugal. It dries quickly and slips under a helmet without adding bulk. The trade-off: without a lining, it's less warm than a GHEADBAND when you take a break. Keep it for exertion, and wear the GHEADBAND on colder days.
The SOWA cap: protection from the sun and reflected glare
At altitude, the sun is more intense, and snow or light-colored rock reflects some of its rays. SOWA is a 5-panel cap weighing 40 g, made from 145 g/m² recycled ECONYL polyamide, spun in Slovenia and assembled in Poland. Its fabric has a UPF 50+ rating, measured on dry material; protection decreases when the fabric is soaked with sweat. The soft brim folds into a pocket without retaining a crease, and the back adjustment can be tightened with one hand. To cover your arms and legs too, our clothing with a UPF 50+ rating is featured on the UPF 50+ sun-protective clothing page.
How to wear your beanie in the mountains
A well-chosen beanie can become uncomfortable if worn incorrectly under a helmet or hood. Two situations come up time and again in the shop.
Under a mountaineering or ski helmet
The rule is simple: nothing should stick out or bunch up. GEBO and GEBO POW have a jacquard-knit logo knitted into the fabric; GEBO CUFF, GEBO RIB, and GEBO STRIPE have a flat embroidered logo, with no scratchy printed label. With the cuff folded up, a cuffed beanie sits high on the crown and leaves the ears clear during exertion. If you wear a helmet all day, GEBO is the most comfortable.
With a hood and a neck warmer
In strong winds, your head isn't the only thing to think about: heat also escapes through your neck. A thin tube pulled up over your chin complements your beanie without adding bulk under your collar; our summer and winter models are together on the neck warmers for the mountains page. As for hoods, the GEBO CUFF product page emphasizes this point: no extra bulk that could make the hood slip forward. To organize your upper-body layers, our three-layer system guide explains the logic.
Care, warranty, and repair for a wool beanie
No bleach, tumble drying, or ironing: air-dry. Washing instructions vary by style: some should be hand-washed in lukewarm water, while others can be machine-washed at 30 °C with a mild detergent. Follow the label sewn into your beanie. The wool knit is undyed, so its color won't run onto a light base layer worn underneath.
Our accessories come with a 5-year commercial warranty, in addition to the 2-year statutory warranty of conformity. If there's a defect or wear, contact our repair service before considering a replacement. Our clothing contains no PFAS, and has not since the brand was founded in 2018. Glasses, water bottles, and bags are in the mountain accessories section.
Frequently asked questions about mountain beanies
What is the warmest beanie for winter?
Our warmest options for breaks are GEBO POW, with its fleece lining, and the 2-ply GEBO RIB and GEBO STRIPE knits. The lining adds a layer of still air next to the skin; the 2-ply knit makes the fabric denser. For continuous activity, a beanie with a lighter knit helps prevent sweating under the wool. It's better to put your hood back up at the summit than to climb while soaked.
What are the different types of beanies for the mountains?
Options include the thin helmet-compatible beanie, the cuffed wool style, the ribbed style, and the fleece-lined style. The first is made for wearing while active, under a shell; the others cover the ears better when you're stationary. A pom-pom is a city or resort style choice: it's impractical under a helmet, and we don't offer one.
Does a wool beanie itch?
Raw wool often starts to feel itchy on the forehead, especially when you wear a beanie all day. GEBO POW’s fleece lining prevents direct contact, and GEBO’s fleece band covers the entire circumference of the head. If your skin reacts to all wool, GEBO, made from recycled polyester and cotton, is the safest choice in the range.
What size should I choose for a unisex beanie?
Our beanies come in one size. GEBO RIB’s ribbed knit stretches widthwise, GEBO’s stretchy knit fits the head without squeezing, and the folded cuff on the wool styles lets you adjust the height: unfolded, it covers the ears and nape; folded, it leaves the ears exposed at the top. We don't list head circumference measurements on the product pages, so if you're unsure, our customer service team can help.
DISCOVER OUR STORIES AND ADVICE
Return to the Land of the Meije: Three Acts of Climbing and Mountaineering
How to Choose Your Beanie: The GEBO Guide
Heading to the mountains without a car: one year of Topo Doux with Florian Garibal