Fleeces

Des polaires pour monter sans surchauffer et rester au chaud à chaque pause

Bien choisir sa polaire technique pour la montagne

Setting off by headlamp at 4 °C in the parking lot, with two hours of climbing before the first ray of sunshine: this is the kind of approach where a technical fleece makes all the difference, keeping you warm without soaking your back. Our fleeces are knitted from recycled polyester made from plastic bottles, or recycled polyamide for the microfleece, and assembled in Europe, in Portugal, Hungary or Poland, depending on the model.

L's essentials

  • For exertion: grid knit from 185 to 260 g/m², which lets water vapor escape during the ascent.
  • For stops and cold weather: thick fleece from 240 to 300 g/m², brushed or with a sherpa finish.
  • For a thin, warm layer close to the body: the half-zip DOHLE microfleece with thumbholes.
  • For freedom of movement: the sleeveless SWYPA fleece.
  • 5-year commercial warranty, in addition to the 2-year legal warranty of conformity, and repair service.

Grid, fleece or microfleece: which technical fleece should you choose?

All our fleeces are designed as the middle layer in a layering system, the one that retains warmth. They don't all do it the same way, and the knit structure, more than its thickness, determines how each one is used.

Grid knit, to stay covered on the ascent

Grid knit alternates raised sections of fabric, which trap warm air against the body, with finer channels that let sweat escape. You can keep your technical fleece on during the ascent instead of taking it off every fifteen minutes. The women's GELINOTTE and men's SISKIN use 185 g/m² recycled polyester grid fleece with 8% elastane: 315 g for the former and 355 g for the latter, which adds a hood and reinforcements. The unisex PHANTOM weighs 340 g and uses 260 g/m² fabric: a little more warmth at rest, with the breathability of grid fleece.

Thick fleece, for stops and dry cold

A technical fleece made from dense fleece fabric warms you up faster when stopped, at a checkpoint or in a refuge, but breathes less on a full ascent: that's the trade-off. The hooded HOODEECE is made from 240 g/m² fleece, brushed on the inside and smooth on the outside, so it slides under a jacket without catching. The RYPA and SWEECE use 300 g/m² fleece with a sherpa finish, a looped surface that traps plenty of air. The RYPA adds waterproof panels on the shoulders, where backpack straps rub and snow melts first.

Microfleece, the first warm layer in your pack

The DOHLE microfleece is knitted from recycled ECONYL polyamide and elastane: brushed on the inside, smooth on the outside, with a 3 mm YKK half-zip and thumb loops that keep the sleeves under your gloves. Wear it over a lightweight base layer or next to the skin, under another technical fleece when it's very cold, or on its own in dry, mild weather. It's the piece you pack even when counting every gram.

Which technical fleece for your activity

The terrain determines your choice just as much as the temperature. Here's how we match these fleeces to different activities.

Mountaineering, climbing, and ski touring

On a climb or a skinning ascent, you alternate intense effort with stops in the wind: a technical grid fleece is a must. The SISKIN places its two pockets at waist level so they stay accessible with a harness buckled, and its close-fitting hood fits under a helmet. Its recycled ECONYL polyamide reinforcements at the shoulders and hips stand up to pack abrasion. The GELINOTTE HOODIE, in a women's fit, adds a hood to the 185 g/m² grid fleece and weighs 310 g, while the unisex PHANTOM HOODIE does the same and weighs 365 g in size M.

Hiking, mountain huts, and life in the valley

With a hiking fleece, at a steady pace, fleece comes into its own as soon as you stop. The SWEECE, with a half-length opening secured by three snaps, is easy to handle with thin gloves and weighs 400 g. The HOODEECE keeps your neck warm during breaks with its hood. The sleeveless fleece SWYPA, made from 300 g/m² fabric and weighing 360 g, warms your torso while leaving your arms free: useful for an easy walk in cool weather, or around town under a jacket. The downside of these thick fleeces is that they quickly get too warm on uphill stretches: open the zip before you start sweating.

The details that matter in a mountain fleece

At the same weight, it's the details that make a mountain fleece comfortable to wear all day. Here's what we look at first:

  • the zipper: full-length for plenty of ventilation, or a half-zip or snaps for a simpler garment;
  • the thumb loops on the DOHLE, SISKIN, and PHANTOM, which keep the sleeves from riding up when you put on a jacket;
  • harness-compatible pockets, positioned high on the chest or at the waist;
  • reinforcements on the shoulders, cuffs, or hem, where packs and gloves wear down the fabric;
  • the hood, thin enough to fit under a helmet or a jacket hood.

The trade-off to keep in mind: each reinforcement or hood adds a few dozen grams. For a long approach, a technical fleece without a hood, such as the GELINOTTE, is lighter.

Women's, men's, or unisex fleeces

Some of our technical fleeces come in two cuts, while others are unisex. The GELINOTTE and GELINOTTE HOODIE are designed for a women's fit, and the SISKIN for a men's fit. The DOHLE, RYPA, and HOODEECE come in women's and men's versions. The PHANTOM, PHANTOM HOODIE, SWEECE, and SWYPA are unisex. To see only the styles in your fit, browse women's-fit fleeces or men's-fit fleeces. As for the cuts, the Active Fit of grid fleeces and the DOHLE is close-fitting without being tight, while the regular fit of fleece tops offers more room for layering.

Manufacturing, care, and repair

Where our fleeces are assembled

The assembly location of a technical fleece varies by model, and we list it on each product page. The GELINOTTE and GELINOTTE HOODIE are knitted and assembled in Portugal; the DOHLE is knitted in Italy and assembled in Portugal. The SISKIN, PHANTOM, HOODEECE, and SWYPA are assembled in Hungary, and the SWEECE in Poland. As for materials, the recycled Newlife Yarns polyester used in the HOODEECE, RYPA, and SWEECE is spun in Italy, then knitted in Spain. The water-repellent treatment on the RYPA's shoulders contains no PFAS: none of our garments have contained them since the brand was founded in 2018.

How to wash a technical fleece

For the GELINOTTE, the care instructions recommend machine washing at 30 °C with a mild detergent, zips closed, no bleach or dry cleaning, and tumble drying on low heat only. Check each model's care instructions before the first wash, as they vary from one fleece to another.

Warranty and repairs

All our fleeces come with a 5-year commercial warranty, in addition to the 2-year legal guarantee of conformity. A broken zipper, a rock snag, a worn reinforcement: our repair service will get it back in shape. To learn how to combine your fleece with other layers, read our three-layer system guide.

Frequently asked questions about technical fleece

What sets a technical fleece apart from a classic fleece?

The knit structure and practical details. A technical fleece like the SISKIN or PHANTOM uses a grid knit that wicks away sweat, a close-fitting cut to wear under a jacket, and features designed for use with a backpack and harness: thumb loops, high pockets, reinforcements. A classic fleece, with a more uniform construction, keeps you warm when you're still but is less breathable during exertion.

What weight should I choose for a hiking fleece?

Around 185 g/m² in grid fleece if you walk fast and sweat, as with the GELINOTTE or SISKIN. Around 300 g/m² in fleece if you take long breaks or walk in cold, dry weather, as with the SWEECE. In between, the 260 g/m² grid fleece PHANTOM offers more warmth without sacrificing breathability.

Does a technical fleece protect you from rain?

No. A fleece provides insulation, but it does not replace a waterproof jacket. The RYPA has waterproof shoulder panels and a water-repellent treatment to handle light snow or a brief shower; the rest of the knit lets water through. When the weather turns, put an outer layer over your technical fleece.

Microfleece or thick fleece under a ski jacket?

On a day of downhill skiing with lift access, a thick fleece like the RYPA keeps you warm on the chairlift. For ski touring, a microfleece like the DOHLE or a grid fleece like the GELINOTTE helps prevent overheating on the climb, while a down jacket in your pack provides extra warmth at the summit.

DISCOVER OUR STORIES AND ADVICE

Return to the Land of the Meije: Three Acts of Climbing and Mountaineering

Three climbs around La Meije: classic routes, an arête traverse, and nights in a mountain hut.

How to Choose Your Beanie: The GEBO Guide

Material, fit, fleece, warmth: how to choose your beanie with Lagoped’s five GEBOs.

Heading to the mountains without a car: one year of Topo Doux with Florian Garibal

A Year of Topo Doux: Florian Garibal explains how to head to the mountains without a car, from hitchhiking to taking the train.